Step 1: Install the USB-Link™ 2 drivers and the Device Tester (pg. 9).
Step 2: Choose your connection (wired or wireless) (pg. 24).
If you chose a wired connection, move on to complete steps 4 and 6 only.
Step 3: Install the drivers for the Bluetooth® adapter you are using.
NOTE: Depending on the Bluetooth® adapter you have selected, you may also need to configure the Bluetooth® environment (see Configure the Bluetooth Environment on page 26 of this chapter).
Step 4: Connect the USB-Link™ 2 to the vehicle.
NOTE: Steps 4 through 6 are described in Chapter 3 of this manual.
Step 5: Pair the Device: Step 6: Use the NEXIQ™ Device Tester to test the connection between the USB-Link™ 2 and the vehicle.
